How to Remove an Iron-on Patch on Clothing?

 

How to Remove an Iron-on Patch on Clothing?

 

Custom patch fulfills various needs in terms of branding, creativity, or reusability. You can use custom printed patches, custom woven patches, or custom embroidered patches to decorate your clothing, luggage, canvas, uniforms, or fashion bags. Sometimes, custom patches are seen on jeans, denim, t-shirts, or accessories because they are useful for covering damaged/torn spots or reflecting fashion sense in you. These custom patches don't wear off quickly when the weather is harsh or during its multiple visits through the washer. But they are not permanent and can be easily applied or removed.

You can easily attach iron-on patches to the fabric by fusible glue or pre-warmed iron. Some patches are easily applicable, but they're difficult to eliminate, and few custom embroidery patches tend to leave a portion of the glue behind. Luckily, we have some easy tips for removing iron-on patches.

Tip 1: Apply Heat:

You can apply an iron-on patch with a warm adhesive. To remove that patch, you need to apply heat to the patch to soften the glue. You can turn on your iron to the medium setting and move it slowly over the patch. Try to peel up the edges of the patch after 20 or 30 seconds of ironing. Keep ironing as necessary until the whole patch lifts away. The process may take several minutes.

Tip 2: Use Chemical Solvent:

When a custom patch manufacturer makes a tough patch that won't come off with heat, at that time, you may want to use a chemical solvent. Before attempting this step, you should test the solvent on a small corner of the fabric to make sure the chemical solvent won't damage the garment.

If there are no issues, turn the garment inside out and apply the solvent at the back of the patch. Use a napkin or towel or any cotton fabric to apply solvent until the fabric is saturated. Let it rest on the fabric for three to four minutes or as long as the instructions specify. Try to loosen the patch and apply more solvent if necessary. Use the solvent in a well-ventilated area.

Tip 3: Remove the Remaining Glue:

After removing the iron-on patch successfully, you may find the portion of the adhesive intact on the fabric. To remove this remaining glue, you can use the adhesive solvent designed especially for the clothing material. To check whether the solvent is working fine, you must test it on the edge of the garment first and work in a well-ventilated area. You must use a towel or a napkin or a clothing material to apply the solvent directly to the glue. Let it rest for three to four minutes, and then use a clean towel to remove glue efficiently. Continue this process until you get the desired outcome.

Tip 4: Wash the Garment:

When you complete removing the remaining glue from the clothing material, you should check for the traces of solvent, adhesive, or dirt around the patch. If you find any of that, you should wash the clothing material so that it washes away all traces of solvent or adhesive. The patch may get darker after following the process sometimes. In these circumstances, washing can help to blend the patch with the clothing material. If you don't get a result in the first wash, try again as it may take many washes until the spot fades to the same color as the fabric.

If you are still pulling your hair out to find the perfect solution to remove an iron-on patch, you should stop, take a breath, and read the following information. We have got you covered.

Nail Polish Remover:

Have you ever wondered what acetone can do apart from stripping nail polish off your fingernails? No? Then, let us tell you that the acetone in nail polish remover can remove the glue from the iron-on patches. But, before believing us blindly, you should test a small area of the cloth with nail polish remover to cross-verify. It will stop you from harming the material unknowingly. If everything seems alright, then you can go ahead.

To use this method, you should soak a cotton ball in the nail polish remover and then use it gently around the edge of the patch to soften the glue. Do this till you get your desired outcome?

Use a Hair Dryer:

Remember? Heat can soften the glue, resulting in the removal of an iron-on patch. According to this, your hair dryer is more useful than you imagine. To make this process more successful, you should set your hair dryer on high heat. Hold the hairdryer to the backside of the item, the patch is adhered to.

Now, turn on the hairdryer and blow-dry the back of the patch for as long as it takes to warm up the adhesive. After a few seconds, try to lift the patch off the material. Take time and remove the patch gently.

Once the patch is removed, you can try any of the given solutions to remove the glue from the material.

Warm Water Soaking:

Now, this is an ordinary solution to try. But, remember, extra-ordinary problems can have ordinary solutions. Sometimes, warm water soak can help.

To try this method, fill your sink with enough warm water for the soaking of an item. Make sure that the iron-on patch stays submerged. To do that, you may have to put something heavy on the top of the patch. When the water cools down, drain out the cold water and fill the sink again with warm water. You can do this process for at least two to three hours.

After the item has soaked for a few hours, you should take it out from the water and try removing the patch. Slowly and gradually, the patch will peel off from the item. After removing the patch successfully, you should try techniques to remove the remaining glue.

We hope these tips help you remove the iron-on patch from your clothing material. If you’re still looking for the solutions to your problems, seek EverLighten, we’ll help you with the best possible solutions.

For more info, please visit our website www.everlighten.com.

 

FAQs: 

 

I'm worried about damaging my clothes. Is there a safe way to remove an iron-on patch?

Always test any method, including heat or solvents, on a small, inconspicuous area of the garment first. This ensures the fabric won't be damaged by the removal process.

 

I tried the heat method, but there's still some glue left behind. What can I do?

Don't worry, stubborn glue happens! Here are a few solutions for leftover adhesive:

• Chemical solvent (use with caution):  These can be effective, but always test first on a hidden area.
• Nail polish remover (with extreme caution):  This can be a surprising solution, but only use a small amount on a cotton swab and test in a hidden area first. Acetone, a common ingredient in nail polish remover, can damage some fabrics.
• Continued soaking:  Sometimes, a longer warm water soak can help loosen any remaining adhesive.

After removing the patch, the area looks a little different than the rest of the fabric. What can I do?

Washing the garment can often help blend the patch area with the rest of the fabric.  Sometimes, it may take a few washes for the color or texture to completely match.  If you're concerned about a permanent mark, seek professional help for patch removal.